Back to Blog
Cash, Financing & Exit

Lead Time: Definition, Formula and the Cash It Ties Up

Lead time sets how long cash is out. A 35-day factory quote becomes 77 days of cash out and $169,400 tied up, and better terms free $68,200 of it.

Oz Merchant11 min read

Shrink-wrapped pallets of finished cartons on a factory floor at dawn, a container truck outside the open bay door.

The factory quotes 35 days. For the baby tableware brand used as the example in this post, the cash behind each production run is out for about 77 days, and at that pace about $169,400 is tied up at any moment just to keep selling. Moving the factory balance to 60 days after shipping frees about $68,200 of it, far more than a factory three weeks faster would free.

What is lead time?

Lead time is the time between placing an order and receiving the goods. The lead time formula is the receipt date minus the order date. For a brand that buys finished goods from a factory, the quote covers the factory's own production time, while the time the brand's cash is out runs from the first deposit to the payouts that pay it back. The factory's number is the shortest of the three lead times below.

The lead time formula

The basic formula is simple:

Lead time = date received − date ordered

A purchase order placed on March 1 and received on April 15 has a lead time of 45 days. Two refinements make the number useful.

Quoted and actual lead times differ. The quoted lead time is what the supplier promises. The actual lead time is what happened, measured from the brand's own records. The two can drift apart, and only the actual one belongs in a cash plan.

The end date matters just as much. "Received" can mean finished at the factory, loaded on the ship, landed at the port, checked in at the warehouse or sellable on Amazon. Each choice gives a different lead time. A brand that writes down which start and end dates it uses, and keeps them the same from run to run, can compare one supplier with another and one quarter with the last.

Supplier lead time is the supplier's part: order placed to goods ready to ship. Freight, customs and warehouse receiving come after it, and the brand waits through all of them.

The three lead times a brand runs on

A brand that imports finished goods lives with three lead times at once.

  1. Production lead time. Purchase order to goods finished at the factory. This is the number on the quote.
  2. Order-to-sellable lead time. Purchase order to units that a customer can buy, in the brand's warehouse, its third-party logistics provider (3PL) or Amazon's fulfillment network. This is the one operations plans around.
  3. Cash lead time. First deposit to the payouts that bring the money back. This is the one finance pays for, and the one the quote never mentions.

The silicone baby tableware brand in this example sells about $4.0 million a year: 55 percent on Amazon, 40 percent on its Shopify store and 5 percent wholesale. It sells about 3,500 units a week at an average net price of $22, and it buys from one factory in China. Each unit costs $3.20 from the factory and $1.20 more in freight, duty and fees, so $4.40 landed. The figures are invented to show the arithmetic.

The brand orders eight weeks of supply at a time: 28,000 units, $123,200 all in. The factory asks for 30 percent at order and the balance before the goods ship. One run looks like this:

DayWhat happensCash outTotal out
0Purchase order placed, 30% deposit wired$26,880$26,880
35Goods finished; 70% balance paid before they ship$62,720$89,600
65 to 72Ocean freight, duty, broker and port fees around arrival$33,600$123,200
72Received at the 3PL; Shopify orders start shipping$123,200
86First units sellable on Amazon after the inbound shipment$123,200
76 onwardNet receipts from the run land on each channel's payment dates, Shopify's first and Amazon's later; the average dollar is back around day 113

The production lead time is 35 days. The order-to-sellable lead time is 72 days for the Shopify store and 86 for Amazon. The cash lead time is the long one: money starts leaving on day 0 and, on average, comes back as net receipts on day 113.

How lead time sets the cash a brand needs

Not every dollar leaves on day 0, so the measure to use is the average day the money goes out, weighted by the amounts:

(26,880 × 0 + 62,720 × 35 + 33,600 × 68) ÷ 123,200 ≈ day 36

The average dollar leaves around day 36 and comes back around day 113. Each dollar of this run is out for about 77 days.

Turn days into dollars with one more input. The brand uses up 3,500 units a week at $4.40 of cost of goods sold each, or $15,400 a week, $2,200 a day. The cash tied up in the buying cycle is:

Cash tied up = daily cost of goods sold × days the money is out

$2,200 × 77 = $169,400

That is roughly the amount this brand has sitting in deposits, goods at sea, goods in the warehouse and payouts on the way. The two factory payments alone come to $89,600, and they leave on days 0 and 35, long before day 113. A new run goes out every 56 days, so the next deposit is due before the last run has come home. The same figure, measured across the whole business rather than one run, is the cash conversion cycle.

What a longer lead time costs

If the factory is always three weeks late and the brand plans for it, the real lead time runs three weeks past the quote on every run: two extra weeks in production and one more at the port. To have stock in time, the brand has to order three weeks earlier, so the deposit goes out 21 days sooner relative to the sales it funds, the balance 7 days sooner, and the freight bills land at about the same point.

ScenarioAverage day paidAverage day backDays outCash tied up
Quoted lead time, balance before ship3611377$169,400
Three weeks longer, run after run4913485$187,000
Quoted lead time, balance 60 days after ship6711346$101,200

A factory that is always three weeks late, and planned for, adds about eight days of cash time and about $17,600 to the cash the business carries on average ($187,000 against $169,400), for the same sales. The increase is smaller than 21 days because only the deposit waits the full three weeks longer.

The first late run, the one nobody planned for, costs more. When a run ordered on the 35-day quote slips by three weeks, the shelf is empty for those 21 days, so no net receipts come in against the $2,200 a day of stock at cost while the next run's deposit and balance go out on their original dates. That is a one-time hole of about $46,200 at cost (21 days × $2,200), and more in the bank, because the missing payouts carry margin as well as cost. Carrying three extra weeks of stock ties up the same $46,200 of cash: paid in advance and planned for, or found as a hole when the factory emails.

What the P&L shows while the money is out

Part of the surprise is that the profit and loss statement shows none of this. In the books:

  • The deposit and the balance are an advance to the supplier, a prepaid asset, until the brand owns the goods. Under FOB terms, which many factories quote, the brand usually takes control of the goods when they are loaded, and the advance becomes inventory in transit; the purchase contract decides.
  • Freight, duty and fees join the cost of that inventory. The full $4.40 per unit is the landed cost, and none of it is an expense yet.
  • Cost of goods sold is recorded only as each unit sells, from about day 72 onward.

So for the first ten weeks of a run, the P&L shows none of this run's cost while the bank has paid out $123,200. A brand that judges its cash by its profit will feel richer than it is during exactly the weeks when it has the least to spend. The guide that follows one run from factory deposit to payout dates each of these entries against the bank balance.

Payment terms shorten the cash lead time

A faster factory shortens the physical lead time. Better payment terms shorten the cash lead time without moving a single carton, and in this example they are the bigger lever.

Keep the 30 percent deposit and the 35-day production, but move the balance from "before ship" to 60 days after shipping, paid around day 95. The average dollar now leaves around day 67 instead of day 36, and the money is out for about 46 days instead of 77. On the third row of the table above, cash tied up falls to $101,200, freeing about $68,200 compared with standard terms. That is the same effect as adding to the brand's days payable outstanding, and the guide to the cash conversion cycle for ecommerce shows how it moves the whole cycle.

Terms can come with a price. A factory that grants them may build the cost into the unit price, so price them as a rate. Borrowing the same $68,200 on a line of credit at an illustrative 12 percent a year costs about $8,200 a year. The brand buys about $582,400 a year at factory prices (6.5 runs of $89,600), so terms that add 2 percent to the factory price cost about $11,650 a year, more than the line. Terms that add 1 percent cost about $5,800, less than the line. At a 12 percent line, the break-even is about 1.4 percent on the factory price. The brand's own borrowing rate sets its own break-even, and the guide to negotiating with suppliers covers what a factory may ask in return.

Lead time vs cycle time

Cycle time is how long the work takes once it has started: the days a factory spends making the run, or the hours a 3PL takes to pick and pack an order.

Lead time is the wait the buyer feels, from placing the order to receiving it. It includes the cycle time plus everything around it: the queue before production starts, the material the factory has to buy first, inspection, freight and receiving.

A factory can cut its cycle time and leave the brand's lead time unchanged, for example by producing faster but starting later because its line is booked. For a brand's cash, lead time is the number that counts, because the deposit leaves at the start of the wait, not the start of the work.

How to measure actual supplier lead time from the brand's own records

Each of these dates is already on a document the brand receives or sends:

DateWhere it lives
Purchase order placedThe purchase order
Deposit paidThe bank statement
Goods loadedThe bill of lading or the factory's commercial invoice
Arrived at portThe forwarder's arrival notice or invoice
Received at the warehouseThe 3PL's receiving report
First saleThe channel's order history
PayoutThe settlement report and the bank deposit

From those dates a brand can compute, for each of its last several runs, the actual production lead time (loaded minus ordered), the order-to-sellable lead time (received minus ordered) and the cash lead time (first payment to the run's net receipts). Set beside the quote, the actual figures show how far each factory runs past its promise. Lining the runs up by month shows whether the late ones fall around factory holidays or peak season.

For the cash plan, the useful number is the longer end of the recent actual lead times, not the average and never the quote. Payout timing belongs in the same table. Amazon pays out on its own settlement cycle, and once it sends a payment, its seller FAQ says the money can take up to five business days to reach the bank (as of November 2026). Each of those days sits inside the cash lead time.

With actual dates in hand, a brand can answer two things before it places the next order: how much it can afford to commit, and when the cash from the last run will be back to cover it. A week-by-week cash forecast that carries each deposit, balance and expected payout on its date shows that answer before the money leaves. The 13-week cash flow forecast guide sets one up from scratch.

Planning cash on the quoted days

The common mistake is planning cash on the factory's quoted days. A 35-day quote turns into about 77 days of money out per run, and the second run's deposit lands before the first run's payouts have come home.

What fixes it is three numbers kept up to date: the actual lead time of the last several runs, the cash tied up at that lead time, and the cash that better terms would free. A brand with those three can tell a slip from a crisis, and in this example the third number, $68,200, is worth more than a factory three weeks faster. The second number is, in dollars, the working capital the brand's buying cycle needs.

Frequently asked questions

What is the difference between lead time and cycle time?

Cycle time is how long the work takes once it starts, such as the days a factory spends producing a run. Lead time is the full wait from placing an order to receiving it, which includes cycle time plus queues, material sourcing, freight and receiving. A factory can shorten its cycle time without shortening the lead time the brand experiences.

How does lead time affect cash flow?

Lead time sets how long money is out between paying a supplier and getting paid by customers. Multiply daily cost of goods sold by the days the money is out to get the cash tied up. A brand with $2,200 a day of cost of goods sold and 77 days out has about $169,400 tied up, and every extra day the money is out adds $2,200.

What is supplier lead time?

Supplier lead time is the time a supplier takes from receiving a purchase order to having the goods ready to ship, which is usually the figure on the quote. It leaves out freight, customs and warehouse receiving, so a brand's full order-to-sellable lead time is longer. Actual supplier lead time is measured from the purchase order and the loading date in the brand's own records.

See the whole platform

Reading it is one thing. Running it is another.

Book a demo for an overview of the whole platform.

Margin Matters

The ecommerce news, read for your margin

Twice a month: the changes that touch your P&L, the money behind each one, and one move to make. Three minutes, then back to work.

Twice a month. Unsubscribe anytime.